Additive manufacturing
Build preparation, support generation and print simulation for powder-bed and multi-axis additive processes, in the same system as design.
Designcenter NX CAM
NC programming from 2.5-axis milling to 5-axis, turning, robots and additive.
Designcenter NX CAM overview
Designcenter NX CAM is Siemens' NC programming system. It covers milling, turning, mill-turn, robotic machining and additive, with postprocessing and G-code driven machine simulation built in. It works on the same Designcenter NX model as design, so the shop floor always machines the released revision. It is part of Designcenter NX for Manufacturing, Siemens' connected system for programming, simulating and integrating CNC machining, robotics, additive manufacturing and quality inspection.
Capabilities
CAM
Feature-based and volume-based milling for prismatic parts, adaptive roughing at constant tool load, rest milling and automatic collision checking.
NC Programming
5-axis finishing with automatic tool tilting, plus turning, mill-turn and multi-function machines programmed and synchronised in one environment.
Part quality control
Program the CMM from the same model, run the inspection and bring results back into Designcenter NX.
Robotic programming
Program and simulate robots for machining, polishing, trimming, deburring and pick-and-place.
Tooling and fixture design
Process-driven design of moulds, dies, electrodes and fixtures, linked directly to the machining program.
Production line planning
Part manufacturing linked to line and process planning, so engineering, automation and controls share one plan.
Data and process management
Models, setup sheets, tool lists and CNC output managed in Teamcenter, released revision only.
NX X Manufacturing
The same CAM capabilities as a scalable cloud subscription: advanced CNC programming with the flexibility and security of cloud technology, in packages sized for small shops through to large enterprises.
Connected shop floor
Designcenter NX CAM links with Teamcenter for data management, Opcenter and Mcenter for production and tool management, and Sinumerik controllers, connecting the part manufacturing process end to end.
Packages
Two on-premises packages and a cloud family, all on the same NX architecture. Add specialist modules through tokens.
NX CAM Foundation
The cornerstone package: translators, operation navigator, toolpath visualisation and material-removal verification, collision checking, CAM templates and an integrated post-processor.
Fact sheetNX Total Machining
The complete CAD/CAM package: high-speed machining, 3 and 5-axis adaptive milling, mill-turn, feature-based machining and NC code simulation, with a full CAD seat.
Fact sheetNX X Manufacturing
NX CAM as a cloud service in four tiers, Essentials to Premium, with built-in data management and named-user licensing. Move up a tier as your work grows.
Fact sheetValue-based licensing add-ons
One token subscription unlocks the add-on modules of NX X Manufacturing when you need them, and releases the tokens when you are done.
Fact sheetBenefits
Minimize programming time
Feature-based machining cuts programming work by up to 90 percent.
Faster machining cycles
Adaptive milling takes deeper cuts at higher feed rates.
Improved component quality
Simulation of the real post-processed G-code before the machine.
Testimonial
Brochure
Siemens Designcenter NX CAM: Digitalize Part Manufacturing e-Book
PDF · 12.2 MB
Resources
Explore our latest resources and insights
Key elements essential for achieving a successful Designcenter NX CAM implementationBlogs · 06/02/2026
NX X Manufacturing solutions fact sheetKnowledge Center · 24/09/2026
Designcenter NX Total Machining fact sheetKnowledge Center · 24/09/2026
Designcenter NX CAM Foundation fact sheetKnowledge Center · 24/09/2026Documents about Designcenter NX CAM
Fact sheets, guides and eBooks from the Knowledge Center.
Frequently asked questions
Which machines does Designcenter NX CAM program?
Milling from 2.5 to 5 axis, turning, mill-turn, wire EDM, robotics and additive, with post-processors for the main controllers.
Does Designcenter NX CAM simulate the real machine?
Yes. G-code driven simulation checks the actual NC program against the machine model before anything reaches the shop floor.
Do I need Designcenter NX CAD to use Designcenter NX CAM?
No. Designcenter NX CAM works on imported geometry from any CAD system, though Designcenter NX CAD and CAM in one model saves rework.
Can NomuTech set up post-processors for our machines?
Yes. Post-processor development and validation is part of our implementation service.
Is there a cloud version of Designcenter NX CAM?
Yes. NX X Manufacturing delivers Designcenter NX CAM as a subscription on Siemens cloud, scaled to the size of your shop and without licence servers to maintain.
Can Designcenter NX CAM connect to our production systems?
Yes, through Teamcenter, Opcenter and Sinumerik integration, so programs, tools and resources flow between engineering and the shop floor without manual re-entry.
What is the difference between NX CAM Foundation and NX Total Machining?
Foundation is the base for NC programming: translators, toolpath verification, templates and post-processing. Total Machining adds high-speed, 5-axis, mill-turn and feature-based machining plus a full CAD seat.
Can we run NX CAM in the cloud?
Yes. NX X Manufacturing delivers the same NX CAM through a cloud subscription in four tiers, with built-in data management and optional token add-ons.
Offers for Designcenter NX CAM
Bundles and programmes that include this product.
More in Engineering Design & Manufacturing
Have a project in mind?
Tell us what you are building and a NomuTech engineer will get in touch.
Brochure
PDF12.2 MBSiemens Designcenter NX CAM: Digitalize Part Manufacturing e-Book